News

The advantages of Qingdao Aite Bending Center are mainly reflected in the following aspects: 

1) For processing companies that need to foam parts (such as refrigerators, rice steamers, etc.), the consistency of parts provided by the bending center makes it no longer necessary to clean the parts, and the processing efficiency and product quality have been significantly improved. 

2) The bending center adopts the angle cutting positioning method, which can always keep the size of the appearance reference surface accurate, so that the appearance parts can be guaranteed to have high consistency. Even after the front-end material is cut, the straightness of the edge of the sheet is relatively poor. It can also maintain a high precision. 

3) Since commercial kitchenware companies use a large number of thin stainless steel plates (thickness below 0.8mm), when performing manual bending, the operators’ pursuit of efficiency and operation synchronization are difficult to be consistent, making reverse bending inevitable. After using the bending center, there is no need to manually lift the plate during the bending process of large panels, avoiding the reverse bending caused by the inadequate manual lifting of the plate, greatly improving the surface quality, and the production efficiency is also greatly improved compared to the use of bending machines, with an average increase of more than 40%.

4) Highly flexible processing can meet small batch and multi-variety production.The multi-sided bending center has a unique ABA technology that can quickly adjust the length of the presser, and can even complete the length adjustment when the robot changes sides. This means that the bending center only needs to spend 2 to 3 seconds more to complete the processing of first bending the long side and then the short side (short package long), or polygonal bending, which requires frequent adjustment of the presser length. 

5) It meets many indispensable processes for bending machine processing and provides a new means for developing new products. Compared with traditional bending machines, the processing capacity of the bending center is very powerful. 

6) The configuration is professional and targeted.