English
The width of the V-groove of the lower die of the bending machine usually depends on factors such as the type and thickness of the material to be bent and the required bending radius. In general, the following formula can be used to calculate the width of the V-groove:
V-groove width = K × plate thickness
K is a coefficient determined by material type and bending radius. Common K values ??usually range from 6 to 10, and the specific value should be selected based on actual conditions and experience.
It should be noted that this formula is an approximation and may be fine-tuned in actual applications according to specific circumstances. In addition, the type of equipment and manufacturer is recommendations of the bending machine should also be considered to ensure that the appropriate V-groove width is selected.
The optimal V-groove width can be determined by trial and adjustment to ensure the stability of the material and the best forming effect during the bending process. If you are not sure, it is recommended to consult the bending machine manufacturer or professional engineer for more accurate advice.
